Polyfuse (resettable PTC) lifetime

Is there any lifetime to these things? Number of resets? I looked here but could find no such spec.

  • Raychem indicate that rapidly cycled polyfuses do have a finite cycle lifetime.

See the diagram below, taken from the useful PolySwitch PPTC Device Principals of Operation (sic) seems likely to be similar to the Littlefuse document which you are not permitted to share - maybe this is why :-).

As Tyco / Raychem publish this curve publicly they may be a better source of information on lifetime and cycling, even though not the brand you were working with.

enter image description here

The term "extended" here suggests to me that they consider 1000+ cycles a non-standard application. I do not know what "rapid" means in this context.

As trip point is closely related to device temperature (and can be affected by eg thermal effects of adjacent contacting metalwork, PCB track thermal characteristics and air flow) then it is essentially certain that trip current will decrease as on resistance rises. As noted by others, as power dissipation is related to I^2.R and as I is established by external circuit elements, it looks likely that trip current would start to fall from about 750 cycles onwards for the example in the graph.

The Polyswitch or Polyfuse was invented by Raychem Corporation (now TE Connectivity).
How well their data applies to competitors products is uncertain but components using the same basic principal seem liable to share somewhat similar characteristics, including cycle lifetime.


Related:

This does not directly answer the lifetime question but may help with the cumulative effects (or lack thereof) of multiple trips.

My understanding based on material referenced below + prior understanding is:

  • Polyfuses consist of a matrix of an electrically conductive material embedded in an electrically non conductive polymer binder.

Heating of the PF to a trip temperature (typically 125 C)

  • causes the binder to expand due to melting of crystalline structures in the polymer

  • so that they assume an amorphous state which has a higher physical volume,

  • so that the material expands and

  • the conductive material to begin to separate due to physical separation of the conductive particles

  • so that resistance increases, and

  • self-heating increases in a regenerative manner such that

  • a small holding current is enough to maintain the PF in the "tripped" high resistance state.

    When holding current is removed the device cools and contracts.

Cooling and contraction is a thermo-mechanical process. Initial return to a low resistance state occurs within seconds to tens of seconds due to temperature drop but a complete return to initial resistance due to recrystallisation may take days weeks or months.

There is some maximum resistance value "Rimax" that a device will assume post reset under standard test conditions* that can be used as a maximum design parameter.
(* Measure after the device has been depowered for one hour post-trip.)

Resistance post-trip will be "reset" to some value > Rinitial and <= Rimax after each trip, but apart from this, increases are non-cumulative with multiple trips. In view of the Raychem curve at the top of this post, that conclusion seems liable to be true for only a 'sensibly small' number of cycles
[for selected and limited values of "sensibly" :-) ].

Based on

This March 2013 Stack Exchange question (serendipitously discovered with a web search)covers similar but not identical material. PTC fuse resistance characteristic?

The question contained a link to this utterly superb 2008 13 page Tyco document
Fundamentals of PolySwitch Overcurrent and Overtemperature Devices

While the document is Tyco focused it contains much general material.

Material on page 4 starting "Reflow and trip jump (Rimax) " is of likely relevance.

They note

  • PolySwitch devices exhibit some resistance hysteresis when tripped, either through an electrical trip event or through a thermal event such as reflow. This hysteresis is observed as a resistance increase over the as-delivered resistance of the PolySwitch device. Figure 4 shows typical behavior for a PolySwitch device that is tripped and then allowed to cool. In this figure, we can clearly see that even after a number of hours the device resistance is still greater than the initial resistance. Over an extended period of time, the resistance will continue to fall and will eventually approach the initial resistance.

However, since this time can be days, months, or years, it is not practical to expect that the device resistance will reach the original value for operational purposes. Therefore, when PolySwitch devices are being developed, this "trip jump" or "reflow jump" is taken into consideration when determining the hold current. This increase in resistance is defined as R1MAX and is measured one hour after the thermal event.
It should be noted that these trip jumps are non-cumulative over sequential trip events.

BUT, as above, "In view of the Raychem curve at the top of this post, that conclusion seems liable to be true for only a 'sensibly small' number of cycles
[again, for selected and limited values of "sensibly" :-) ]."

I understand the reference to resistance measurement one hour after tripping NOT to mean "with power still applied", but the resistance after having "settled" in an unpowered state for one hour after having been tripped.


http://www.ttiinc.com/docs/IO/6867/raychem.pdf

http://en.wikipedia.org/wiki/Resettable_fuse

Littelfuse 0805 products

Littelfuse 1206L series

Littelfuse 1210L series

Littelfuse 60R series

Littelfuse Poly-fuse home page

Littelfuse Polyfuse selection guide


For a design demanding a large number of cycles from a PTC, the term to look for is switching PTC. For instance, these EPCOS switching PTCs are designed for 30,000 cycles.

At a higher price point, clamped PTC ceramics have free contact motion when heating up, permitting between a quarter million and a million switching cycles.

In contrast, these Bourne SMD PTCs are rated at a mere 100 cycles.

There may be SMD switching PTCs existent if through-hole ones are not convenient, but a cursory search did not throw out any meaningful results, YMMV.

Tags:

Polyfuse

Ptc