Wifi-Disabled: Ubuntu 19.10 - Intel Wireless 7265
Update: In my case WIFI works again after disabling 802.11n. I added the option 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf - now it looks like this:
# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac8021
options iwlwifi 11n_disable=1
See also https://wiki.archlinux.org/index.php/Network_configuration/Wireless#iwlwifi (the iwlwifi parameters apply to Ubuntu too and Arch has great documentation )
I have the exact same problem (no WIFI connections after upgrade to Ubuntu MATE 19.10) and the exact same WIFI card (same output of lspci).
The problem is also present for new installs of Ubuntu MATE and has nothing to do with the upgrade - I tried with the Ubuntu Mate 18.10 and Kubuntu 19.10 on a USB stick: same behavior. So I would say all Ubuntu 19.10 flavors are affected.
I want to elaborate on the what's not working part:
- WIFI is active, and I can see available networks, e.g. with
iwlist wlp3s0 scan - However, connecting to a network (with the GUI) fails: after entering credentials (for a password protrected WPA2 network) it tries to connect for a few seconds but then asks for a passphrase again .. and again ..
- Also the problem is not the GUI, the exact same behavior is shown by
nmtui
Checking the output of NetworkManager in /var/log/syslog we can see that the association is the one that fails:
sudo cat /var/log/syslog | grep "(wlp3s0)" | sed 's/.*device //'
device (wlp3s0): Activation: starting connection 'MY_WIFI' (c5c790fb-86a8-4905-97b0-75170f5e985c)
device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): Activation: (wifi) access point 'MY_WIFI' has security, but secrets are required.
device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): Activation: (wifi) connection 'MY_WIFI' has security, and secrets exist. No new secrets needed.
device (wlp3s0): supplicant interface state: ready -> scanning
device (wlp3s0): supplicant interface state: scanning -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> disconnected
device (wlp3s0): supplicant interface state: disconnected -> scanning
device (wlp3s0): supplicant interface state: scanning -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> disconnected
device (wlp3s0): supplicant interface state: disconnected -> scanning
device (wlp3s0): supplicant interface state: scanning -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> disconnected
device (wlp3s0): supplicant interface state: disconnected -> scanning
device (wlp3s0): supplicant interface state: scanning -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> disconnected
device (wlp3s0): supplicant interface state: disconnected -> scanning
device (wlp3s0): supplicant interface state: scanning -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> disconnected
device (wlp3s0): Activation: (wifi) association took too long
device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): Activation: (wifi) asking for new secrets
device (wlp3s0): supplicant interface state: disconnected -> scanning
device (wlp3s0): no secrets: User canceled the secrets request.
device (wlp3s0): state change: need-auth -> failed (reason 'no-secrets', sys-iface-state: 'managed')
device (wlp3s0): Activation: failed for connection 'MY_WIFI'
device (wlp3s0): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
This is what the log looked like before the update with Ubuntu MATE 19.04
device (wlp3s0): Activation: starting connection 'MY_WLAN' (b3dffdda-2b7b-467d-a1f5-2b3077d26eb3)
device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): Activation: (wifi) access point 'MY_WLAN' has security, but secrets are required.
device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): Activation: (wifi) connection 'MY_WLAN' has security, and secrets exist. No new secrets needed.
device (wlp3s0): supplicant interface state: ready -> authenticating
device (wlp3s0): supplicant interface state: authenticating -> associating
device (wlp3s0): supplicant interface state: associating -> associated
device (wlp3s0): supplicant interface state: associated -> 4-way handshake
device (wlp3s0): supplicant interface state: 4-way handshake -> completed
device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network "MY_WLAN"
device (wlp3s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
dhcp4 (wlp3s0): dhclient started with pid 20140
dhcp4 (wlp3s0): address 192.168.1.161
dhcp4 (wlp3s0): plen 24 (255.255.255.0)
dhcp4 (wlp3s0): gateway 192.168.1.1
dhcp4 (wlp3s0): lease time 43200
dhcp4 (wlp3s0): hostname 'whakaari'
dhcp4 (wlp3s0): nameserver '192.168.1.1'
dhcp4 (wlp3s0): state changed unknown -> bound
device (wlp3s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
device (wlp3s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
policy: set 'MY_WLAN' (wlp3s0) as default for IPv4 routing and DNS
device (wlp3s0): Activation: successful, device activated.
Checking the journal and logs I can not find any errors or warnings, but I noted that iwlwifi seems to have a debug mode activated.
sudo journalctl | grep iwlwifi for Ubuntu 19.04:
Sep 10 19:59:56 whakaari kernel: iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
Sep 10 19:59:56 whakaari kernel: iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
Sep 10 19:59:56 whakaari kernel: iwlwifi 0000:03:00.0: base HW address: 5c:e0:c5:63:e2:a5
Sep 10 19:59:57 whakaari kernel: iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Sep 10 19:59:57 whakaari sensors[873]: iwlwifi-virtual-0
Sep 10 19:59:58 whakaari NetworkManager[856]: <info> [1568138398.2497] rfkill3: found Wi-Fi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3) (driver iwlwifi)
sudo journalctl | grep iwlwifi for Ubuntu 19.10:
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: Found debug configuration: 0
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
Oct 19 16:16:30 whakaari kernel: iwlwifi 0000:03:00.0: base HW address: 5c:e0:c5:63:e2:a5
Oct 19 16:16:31 whakaari kernel: iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Oct 19 16:16:32 whakaari sensors[941]: iwlwifi-virtual-0
I had the same problem after updating from Ubuntu 19.04 to 19.10. It seems that before the update process, we both probably had the package "backport-iwlwifi-dkms" installed, either manually or automatically. That package compiled a driver for the specific version kernel you were on. Although it may have mostly worked after the update, the Additional Drivers tool identified a compatibility mismatch with the new kernel.
The solution for me was quite simple: reinstall backport-iwlwifi-dkms with the following command. There was no need to disable 802.11n or anything else!
sudo apt install backport-iwlwifi-dkms
After the installation finishes, close the Additional Drivers window and reopen it. The window should now look like this.
