OpenCV/Python: read specific frame using VideoCapture

The following code can accomplish that:

import cv2
cap = cv2.VideoCapture(videopath)
cap.set(cv2.CAP_PROP_POS_FRAMES, frame_number-1)
res, frame = cap.read()

frame_number is an integer in the range 0 to the number of frmaes in the video.
Notice: you should set frame_number-1 to force reading frame frame_number. It's not documented well but that is how the VideoCapture module behaves.

One may obtain amount of frames by:

amount_of_frames = cap.get(cv2.CAP_PROP_FRAME_COUNT)

Thank you GPPK.

The video parameters should be given as integers. Each flag has its own value. See here for the codes.

The correct solution is:

import numpy as np
import cv2

#Get video name from user
#Ginen video name must be in quotes, e.g. "pirkagia.avi" or "plaque.avi"
video_name = input("Please give the video name including its extension. E.g. \"pirkagia.avi\":\n")

#Open the video file
cap = cv2.VideoCapture(video_name)

#Set frame_no in range 0.0-1.0
#In this example we have a video of 30 seconds having 25 frames per seconds, thus we have 750 frames.
#The examined frame must get a value from 0 to 749.
#For more info about the video flags see here: https://stackoverflow.com/questions/11420748/setting-camera-parameters-in-opencv-python
#Here we select the last frame as frame sequence=749. In case you want to select other frame change value 749.
#BE CAREFUL! Each video has different time length and frame rate. 
#So make sure that you have the right parameters for the right video!
time_length = 30.0
fps=25
frame_seq = 749
frame_no = (frame_seq /(time_length*fps))

#The first argument of cap.set(), number 2 defines that parameter for setting the frame selection.
#Number 2 defines flag CV_CAP_PROP_POS_FRAMES which is a 0-based index of the frame to be decoded/captured next.
#The second argument defines the frame number in range 0.0-1.0
cap.set(2,frame_no);

#Read the next frame from the video. If you set frame 749 above then the code will return the last frame.
ret, frame = cap.read()

#Set grayscale colorspace for the frame. 
gray = cv2.cvtColor(frame, cv2.COLOR_BGR2GRAY)

#Cut the video extension to have the name of the video
my_video_name = video_name.split(".")[0]

#Display the resulting frame
cv2.imshow(my_video_name+' frame '+ str(frame_seq),gray)

#Set waitKey 
cv2.waitKey()

#Store this frame to an image
cv2.imwrite(my_video_name+'_frame_'+str(frame_seq)+'.jpg',gray)

# When everything done, release the capture
cap.release()
cv2.destroyAllWindows()