No /proc in a Busybox-based embedded Linux distribution

After initialising and mounting the root file system, Linux starts /sbin/init which carries on with the user space initialisations including mounting /proc

Most likely your rcS or whatever configuration init reads doesn't do that, and you need to tell it to.

If you've got a shell prompt, you can mount /proc manually with:

mount -t proc p /proc

Note that the /proc directory must exist before you can mount something there. You should include it in your root image.

2) is very likely because of 1) - ps uses /proc to get information about running processes.

1) is either because the initialisation isn't expected to do that or because it fails to do it. Check what the distribution is supposed to do on boot - how the system is to be brought up.

Things you can try:

• mount /proc, e.g.: mount -t proc proc /proc - the second argument is arbitrary (it's what shows as the source of the mount). Check what is running with PID=1

• check in /proc/cmdline what parameters your kernel receives on boot. If it contains init=... you might need to change it to e.g. /sbin/init or remove it to let kernel try to resolve the init to be run itself. You have to do this in bootloader configuration (for R-Pi this is in some text file on the SD card IIRC).

• Check that the desired init executable exists - Busybox normaly has tons of symlinks pointing to its binary so that one can use command [args] rather than busybox command [args]. Your might be missing those.