How to get TX/RX bytes without ifconfig?

Solution 1:

The ip command which is part of the the iproute2 package is the new tool. The link subcommand is for managing the devices/interfaces.

If you can get the stats of an interface using ip -s link

root:~# ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    RX: bytes  packets  errors  dropped overrun mcast
    50679705   529967   0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    50679705   529967   0       0       0       0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1d:7d:aa:e3:4e brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    187663757  308710386 0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    4051284587 532435117 0       0       0       0

Solution 2:

Another option is to use the /proc filesystem. The /proc/net/dev file contains statistics about the configured network interfaces. Each line is dedicated to one network interface and it contains statistics for receive and transmit. The statistics include metrics such total number of received/transmittted bytes, packets, drops, errors and so on.

cat /proc/net/dev

    Inter-|   Receive                                                |  Transmit
     face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed

    lo:    29846937   129576     0    0    0     0          0       0 29846937   129576     0    0    0     0       0          0
 wlan0:    9467393340 8027251    0    0    0     0          0       0 2559312961 5896509    0    0    0     0       0          0

Or you can try the netstat command which can display all network interfaces and related statistics:

netstat -i

Iface   MTU Met    RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
lo         65536   0   130435      0      0      0   130435      0      0      0 LRU
wlan0       1492   0  8028018      0      0      0  5897361      0      0      0 BMRU

---

Solution 3:

You can get all necessary info via proc

# cat /sys/class/net/eth0/statistics/rx_bytes
# cat /sys/class/net/eth0/statistics/rx_packets

# cat /sys/class/net/eth0/statistics/tx_packets
# cat /sys/class/net/eth0/statistics/tx_bytes

Also you can use iptables and parse output.

For received packets

# iptables -L INPUT -n -v

for transmitted packets

# iptables -L OUTPUT -n -v 

If server is a gateway, then you should also parse FORWARD chain