Finding Bluetooth low energy with python

As I said in the comment, that library won't work with BLE.

Here's some example code to do a simple BLE scan:

import sys
import os
import struct
from ctypes import (CDLL, get_errno)
from ctypes.util import find_library
from socket import (
    socket,
    AF_BLUETOOTH,
    SOCK_RAW,
    BTPROTO_HCI,
    SOL_HCI,
    HCI_FILTER,
)

if not os.geteuid() == 0:
    sys.exit("script only works as root")

btlib = find_library("bluetooth")
if not btlib:
    raise Exception(
        "Can't find required bluetooth libraries"
        " (need to install bluez)"
    )
bluez = CDLL(btlib, use_errno=True)

dev_id = bluez.hci_get_route(None)

sock = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI)
sock.bind((dev_id,))

err = bluez.hci_le_set_scan_parameters(sock.fileno(), 0, 0x10, 0x10, 0, 0, 1000);
if err < 0:
    raise Exception("Set scan parameters failed")
    # occurs when scanning is still enabled from previous call

# allows LE advertising events
hci_filter = struct.pack(
    "<IQH", 
    0x00000010, 
    0x4000000000000000, 
    0
)
sock.setsockopt(SOL_HCI, HCI_FILTER, hci_filter)

err = bluez.hci_le_set_scan_enable(
    sock.fileno(),
    1,  # 1 - turn on;  0 - turn off
    0, # 0-filtering disabled, 1-filter out duplicates
    1000  # timeout
)
if err < 0:
    errnum = get_errno()
    raise Exception("{} {}".format(
        errno.errorcode[errnum],
        os.strerror(errnum)
    ))

while True:
    data = sock.recv(1024)
    # print bluetooth address from LE Advert. packet
    print(':'.join("{0:02x}".format(x) for x in data[12:6:-1]))

I had to piece all of that together by looking at the hcitool and gatttool source code that comes with Bluez. The code is completely dependent on libbluetooth-dev so you'll have to make sure you have that installed first.

A better way would be to use dbus to make calls to bluetoothd, but I haven't had a chance to research that yet. Also, the dbus interface is limited in what you can do with a BLE connection after you make one.

EDIT:

Martin Tramšak pointed out that in Python 2 you need to change the last line to print(':'.join("{0:02x}".format(ord(x)) for x in data[12:6:-1]))

You could also try pygattlib. It can be used to discover devices, and (currently) there is a basic support for reading/writing characteristics. No RSSI for now.

You could discover using the following snippet:

from gattlib import DiscoveryService

service = DiscoveryService("hci0")
devices = service.discover(2)

DiscoveryService accepts the name of the device, and the method discover accepts a timeout (in seconds) for waiting responses. devices is a dictionary, with BL address as keys, and names as values.

pygattlib is packaged for Debian (or Ubuntu), and also available as a pip package.