Create kubernetes nginx ingress without GCP load-balancer

Yes this is possible. Deploy your ingress controller, and deploy it with a NodePort service. Example:

---
apiVersion: v1
kind: Service
metadata:
  name: nginx-ingress-controller
  namespace: kube-system
  labels:
    k8s-app: nginx-ingress-controller
spec:
  type: NodePort
  ports:
  - port: 80
    targetPort: 80
    nodePort: 32080
    protocol: TCP
    name: http
  - port: 443
    targetPort: 443
    nodePort: 32443
    protocol: TCP
    name: https
  selector:
    k8s-app: nginx-ingress-controller

Now, create an ingress with a DNS entry:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: my-ingress
spec:
  rules:
  - host: myapp.example.com
    http:
      paths:
      - path: /
        backend:
          serviceName: my-app-service #obviously point this to a valid service + port
          servicePort: 80

Now, assuming your static IP is attached to any kubernetes node running kube-proxy, have DNS updated to point to the static IP, and you should be able to visit myapp.example.com:32080 and the ingress will map you back to your app.

A few additional things:

If you want to use a lower port than 32080, then bear in mind if you're using CNI networking, you'll have trouble with hostport. It's recommend to have a load balancer listening on port 80, I guess you could just have nginx set up to do proxy pass, but it becomes difficult. This is why a load balancer with your cloud provider is recommended :)

TLDR: If you want to serve your website/webservice on ports below 3000, then no, it's not possible. If someone finds a way to do it, I'd be eager to know how.

The two main approaches I used while trying to serve on a port below 3000 included:

• Installing the nginx-ingress controller service to be of type NodePort, listening on ports 80 and 443. However, this results in the following error:

  Error: UPGRADE FAILED: Service "nginx-ingress-controller" is invalid:
  spec.ports[0].nodePort: Invalid value: 80: provided port is not in the
  valid range. The range of valid ports is 30000-32767
  

  The way to work around this error is to change the --service-node-port-range flag used when starting kube-apiserver. However, this configuration cannot be accessed on GCP. If you'd like to try for yourself, you can check out the instructions here: Kubernetes service node port range
• Following the steps in the thread Expose port 80 and 443 on Google Container Engine without load balancer. This relies on using an externalIP attribute attached to a service of type: ClusterIP. At first glance, this would seem to be an ideal solution. However, there is a bug in the way that the externalIP attribute works. It does not accept an external, static IP, but rather an internal, ephemeral IP. If you hardcode an internal, ephemeral IP in the externalIP field, and then attach an external, static IP to one of the nodes in your cluster through the GCP Console, requests are successfully routed. However, this is not a viable solution because you've now hardcoded an ephemeral IP in your service definition, so your website will inevitably go offline as the nodes' internal IPs change.

If you are okay with serving on ports above 3000, see my instructions below.

---

How to remove the LoadBalancer (only allows serving on ports > 3000)

I've tried removing my LoadBalancer, and this is the best solution I could come up with. It has the following flaws:

• The ports used to access the webpage are not the usual 80 and 443 because exposing these ports from a node is not trivial. I'll update later if I figure it out.

And the following benefits:

• There's no LoadBalancer.
• The IP of the website/webservice is static.
• It's relies on the popular nginx-ingress helm chart.
• It uses an ingress, allowing complete control over how requests are routed to your services based on the paths of the requests.

1. Install the ingress service and controller

Assuming you already have Helm installed (if you don't follow the steps here: Installing Helm on GKE), create an nginx-ingress with a type of NodePort.

helm install \
  --name nginx-ingress \
  stable/nginx-ingress \
  --set rbac.create=true \
  --set controller.publishService.enabled=true \
  --set controller.service.type=NodePort \
  --set controller.service.nodePorts.http=30080 \
  --set controller.service.nodePorts.https=30443

2. Create the ingress resource

Create the ingress definition for your routing.

# my-ingress-resource.yaml

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: reverse-proxy
  namespace: production # Namespace must be the same as that of target services below.
  annotations:
    kubernetes.io/ingress.class: nginx
    nginx.ingress.kubernetes.io/ssl-redirect: "false" # Set to true once SSL is set up.
spec:
  rules:
  - http:
      paths:
      - path: /api
        backend:
          serviceName: backend
          servicePort: 3000
      - path: /
        backend:
          serviceName: frontend
          servicePort: 80

Then install it with

kubectl apply -f my-ingress-resource.yaml

3. Create a firewall rule

Find the tag of your cluster.

gcloud compute instances list

If your cluster instances have names like

gke-cluster-1-pool-1-fee097a3-n6c8
gke-cluster-1-pool-1-fee097a3-zssz

Then your cluster tag is gke-cluster-1-pool-1-fee097a3.

Go to the GCP firewall page. Verify that you have the right project selected in the navbar.

Click "Create Firewall Rule". Give the rule a decent name. You can leave most of the settings as defaults, but past your cluster tag under "Target tags". Set the Source IP Ranges to 0.0.0.0/0. Under Protocols and Ports, change "Allow all" to "Specified protocols and ports". Check the TCP box, and put 30080, 30443 in the input field. Click "Create".

4. Create a static IP

Go to https://console.cloud.google.com/networking/addresses/ and click "Reserve Static Address". Give it a descriptive name, and select the correct region. After selecting the correct region, you should be able to click the "Attached to" dropdown and select one of your Kubernetes nodes. Click "Reserve".

5. Test the configuration

After reserving the static IP, find out which static IP was granted by looking at the External IP Address list.

Copy it into your browser, then tack on a port (<your-ip>:30080 for HTTP or https://<your-ip>:30443 for HTTPS). You should see your webpage.