Create an Arduino program for measuring the pressure from a FSR and indicate the level of pressure (low, medium, high) through green, yellow and red colors of an RGB LED. If the pressure applied is too high the alarm should be triggered. code example

Example: arduino code to rgb led

int red_light_pin= 11;int green_light_pin = 10;int blue_light_pin = 9;void setup() {  pinMode(red_light_pin, OUTPUT);  pinMode(green_light_pin, OUTPUT);  pinMode(blue_light_pin, OUTPUT);}void loop() {  RGB_color(255, 0, 0); // Red  delay(1000);  RGB_color(0, 255, 0); // Green  delay(1000);  RGB_color(0, 0, 255); // Blue  delay(1000);  RGB_color(255, 255, 125); // Raspberry  delay(1000);  RGB_color(0, 255, 255); // Cyan  delay(1000);  RGB_color(255, 0, 255); // Magenta  delay(1000);  RGB_color(255, 255, 0); // Yellow  delay(1000);  RGB_color(255, 255, 255); // White  delay(1000);}void RGB_color(int red_light_value, int green_light_value, int blue_light_value) {  analogWrite(red_light_pin, red_light_value);  analogWrite(green_light_pin, green_light_value);  analogWrite(blue_light_pin, blue_light_value);}