COM in the non-Windows world?

A quick answer on the last question: COM is far from being obsolete. Almost everything in the Microsoft world is COM-based, including the .NET engine (the CLR), and including the new Windows 8.x's Windows Runtime.

Here is what Microsoft says about .NET in it latest C++ pages Welcome Back to C++ (Modern C++):

C++ is experiencing a renaissance because power is king again. Languages like Java and C# are good when programmer productivity is important, but they show their limitations when power and performance are paramount. For high efficiency and power, especially on devices that have limited hardware, nothing beats modern C++.

PS: which is a bit of a shock for a developer who has invested more than 10 years on .NET :-)


In the Linux world, it is more common to develop components that are statically linked, or which run in separate processes and communicate by piping text (maybe JSON or XML) back and forth.

Some of this is due to tradition. UNIX developers have been doing stuff like this long before CORBA or COM existed. It's "the UNIX way".

As Jerry Coffin says in his answer, when you have the source code for everything, binary interfaces are not as important, and in fact just make everything more difficult.

COM was invented back when personal computers were a lot slower than they are today. In those days, loading components into your app's process space and invoking native code was often necessary to achieve reasonable performance. Now, parsing text and running interpreted scripts aren't things to be afraid of.

CORBA never really caught on in the open-source world because the initial implementations were proprietary and expensive, and by the time high-quality free implementations were available, the spec was so complicated that nobody wanted to use it if they weren't required to do so.


For the remainder of this post, I'm going to use Linux as an example of open-source software. Where I mention "Linux" it's mostly a short/simple way to refer to open source software in general though, not anything specific to Linux.

COM vs. .NET

COM isn't actually restricted to C and C++, and .NET doesn't actually replace COM. However, .NET does provide alternatives to COM for some situations. One common use of COM is to provide controls (ActiveX controls). .NET provides/supports its own protocol for controls that allows somebody to write a control in one .NET language, and use that control from any other .NET language--more or less the same sort of thing that COM provides outside the .NET world.

Likewise, .NET provides Windows Communication Foundation (WCF). WCF implements SOAP (Simple Object Access Protocol)--which may have started out simple, but grew into something a lot less simple at best. In any case, WCF provides many of the same kinds of capabilities as COM does. Although WCF itself is specific to .NET, it implements SOAP, and a SOAP server built using WCF can talk to one implemented without WCF (and vice versa). Since you mention overhead, it's probably worth mentioning that WCF/SOAP tend to add more overhead that COM (I've seen anywhere from nearly equal to about double the overhead, depending on the situation).

Differences in Requirements

For Linux, the first two points tend to have relatively low relevance. Most software is open source, and many users are accustomed to building from source in any case. For such users, binary compatibility/reuse is of little or no consequence (in fact, quite a few users are likely to reject all software that isn't distributed in source code form). Although binaries are commonly distributed (e.g., with apt-get, yum, etc.) they're basically just caching a binary built for a specific system. That is, on Windows you might have a single binary for use on anything from Windows XP up through Windows 10, but if you use apt-get on, say, Ubuntu 18.02, you're installing a binary built specifically for Ubuntu 18.02, not one that tries to be compatible with everything back to Ubuntu 10 (or whatever).

Being able to load and run (with reduced capabilities) when a component is missing is also most often a closed-source problem. Closed source software typically has several versions with varying capabilities to support different prices. It's convenient for the vendor to be able to build one version of the main application, and give varying levels of functionality depending on which other components are supplied/omitted.

That's primarily to support different price levels though. When the software is free, there's only one price and one version: the awesome edition.

Access to library functionality between languages again tends to be based more on source code instead of a binary interface, such as using SWIG to allow use of C or C++ source code from languages like Python and Ruby. Again, COM is basically curing a problem that arises primarily from lack of source code; when using open source software, the problem simply doesn't arise to start with.

Low-overhead RPC to code in other processes again seems to stem primarily from closed source software. When/if you want Microsoft Excel to be able to use some internal "stuff" in, say, Adobe Photoshop, you use COM to let them communicate. That adds run-time overhead and extra complexity, but when one of the pieces of code is owned by Microsoft and the other by Adobe, it's pretty much what you're stuck with.

Source Code Level Sharing

In open source software, however, if project A has some functionality that's useful in project B, what you're likely to see is (at most) a fork of project A to turn that functionality into a library, which is then linked into both the remainder of project A and into Project B, and quite possibly projects C, D, and E as well--all without imposing the overhead of COM, cross-procedure RPC, etc.

Now, don't get me wrong: I'm not trying to act as a spokesperson for open source software, nor to say that closed source is terrible and open source is always dramatically superior. What I am saying is that COM is defined primarily at a binary level, but for open source software, people tend to deal more with source code instead.

Of course SWIG is only one example among several of tools that support cross-language development at a source-code level. While SWIG is widely used, COM is different from it in one rather crucial way: with COM, you define an interface in a single, neutral language, and then generate a set of language bindings (proxies and stubs) that fit that interface. This is rather different from SWIG, where you're matching directly from one source to one target language (e.g., bindings to use a C library from Python).

Binary Communication

There are still cases where it's useful to have at least some capabilities similar to those provided by COM. These have led to open-source systems that resemble COM to a rather greater degree. For example, a number of open-source desktop environments use/implement D-bus. Where COM is mostly an RPC kind of thing, D-bus is mostly an agreed-upon way of sending messages between components.

D-bus does, however, specify things it calls objects. Its objects can have methods, to which you can send signals. Although D-bus itself defines this primarily in terms of a messaging protocol, it's fairly trivial to write proxy objects that make invoking a method on a remote object look pretty much like invoking one on a local object. The big difference is that COM has a "compiler" that can take a specification of the protocol, and automatically generate those proxies for you (and corresponding stubs in the far end to receive the message, and invoke the proper function based on the message it received). That's not part of D-bus itself, but people have written tools to take (for example) an interface specification and automatically generate proxies/stubs from that specification.

As such, although the two aren't exactly identical, there's enough similarity that D-bus can be (and often is) used for many of the same sorts of things as COM.

Systems Similar to DCOM

COM also allows you to build distributed systems using DCOM (Distributed COM). That is, a system where you invoke a method on one machine, but (at least potentially) execute that invoked method on another machine. This adds more overhead, but since (as pointed out above with respect to D-bus) RPC is basically communication with proxies/stubs attached to the ends, it's pretty easy to do the same thing in a distributed fashion. The difference in overhead, however, tends to lead to differences in how systems need to be designed to work well, though, so the practical advantage of using exactly the same system for distributed systems as local systems tends to be fairly minimal.

As such, the open source world provides tools for doing distributed RPC, but doesn't usually work hard at making them look the same as non-distributed systems. CORBA is well known, but generally viewed as large and complex, so (at least in my experience) current use is fairly minimal. Apache Thrift provides some of the same general type of capabilities, but in a rather simpler, lighter-weight fashion. In particular, where CORBA attempts to provide a complete set of tools for distributed computing (complete with everything from authentication to distributed time keeping), Thrift follows the Unix philosophy much more closely, attempting to meet exactly one need: generate proxies and stubs from an interface definition (written in a neutral language). If you want to do those CORBA-like things with Thrift you undoubtedly can, but in a more typical case of building internal infrastructure where the caller and callee trust each other, you can avoid a lot of overhead and just get on with the business at hand. Likewise, google RPC provides roughly the same sorts of capabilities as Thrift.

OS X Specific

Cocoa provides distributed objects that are fairly similar to COM. This is based on Objective-C though, and I believe it's now deprecated.

Apple also offers XPC. XPC is more about inter-process communication than RPC, so I'd consider it more directly comparable to D-bus than to COM. But, much like D-bus, it has a lot of the same basic capabilities as COM, but in different form that places more emphasis on communication, and less on making things look like local function calls (and many now prefer messaging to RPC anyway).

Summary

Open source software has enough different factors in its design that there's less demand for something providing the same mix of capabilities as Microsoft's COM provides on Windows. COM is largely a single tool that tries to meet all needs. In the open-source world, there's less drive to provide that single, all-encompassing solution, and more tendency toward a kit of tools, each doing one thing well, that can be put together into a solution for a specific need.

Being more commercially oriented, Apple OS X probably has what are (at least arguably) closer analogs to COM than most of the more purely open-source world.